aaah, därför jag drar ifrån Tintin på motorvägen (speciellt när jag fryser )
Nu lyser min 100h-lampa.Några tips inför att jag skruvar isär den och kollar remmen?Hur släcker man lampan igen?
HERE IS THE BELT LIGHT RESET PROCEDURE FOR THE KFX700... The KFX700 belt check indicator light turns on after 100 hours to cause you to take it to the dealer and get the belt checked. This procedure is for people that are skilled in checking the 700 belt. Do not reset the light without confirming that the belt is in good condition and is adjusted proberly. A worn or cracked belt can be usafe for the rider. Turn ignition off. Inspect or replace belt as neccessary (P/N 99924-1315-01). You have to take the cover off and measure the deflection. Remove Seat. Locate the two 4 pin connectors under seat. One is black and the other is grey. Disconnect both connectors and reconnect them to their opposite color (black to grey, grey to black). Turn on the ignition switch. The belt indicator light should flash. Turn off ignition switch (note that the hour meter is reset when the key is turned on). Disconnect the two connectors and reconnect them to their same color (black to black, grey to grey). Turn ignition back on and confirm that the belt light is not on.
Hej! Har en goes 500 - 16. Den går bra på tomgången men måste köra på väldigt höga varv för att den ska gå framåt, orkeslös, på backen orkar den inte alls. Nån som har nå bra förslag vad de kan vara? ☺️